Ready, Steady, ...

With just a few hours left in Germany, it might be a good idea to write a little bit about the current status.
My visa got here in time. Just one day after being in Frankfurt, my passport with the attached visa was in the mail, yay!
I also made arrangements for my stay in Atlanta. I found a nice offer on craigslist for a furnished room in Decatur (which is quite close to Atlanta city itself). After a few talks on the phone and exhanging quite some e-mails with the owner of the house, I am confident that this will work out and that I will have a nice stay there till the end of December.

So tomorrow (Sunday) I will depart in Frankfurt at 9.30am and arrive in Atlanta at around 1.00pm. After I got through the screening, customs and imigration I will head to my hotel in downtown Atlanta, where I will stay for one night. The next day I will again go to the airport again, to get on my plane to Denver. After a quick stop my connecting flight will get me to San Jose.
From there I will head to the hotel in Mountain View, where I will (again) stay for one night till Tuesday. The rest of the week I will stay in corporate appartments of Google.
On Tuesday, my orientation will start at the GooglePlex ('Plex). I am really looking forward to that week in Mountain View.

If I have time, I will try to go to San Francisco for one day to visit some friends, but I don't know about the schedule yet.

So that's it for the moment. The next entry will follow, and it will be from the United States.

Comments

Post a Comment

Popular posts from this blog

Installing DD-WRT on the Linksys EA2700

Image
So I had this router for quite a while. I bought the EA2700 when I moved to the US, without doing much research. That was a mistake. I had a bunch of the famous WRT54GL routers before and was super happy with them, mainly due to the flexibility of installing an alternative OS on it, which unleashes a lot more power and functionality. However, the WRT54GL was just too dated in 2012, so I decided to get a newer model and got the Linksys Cisco EA2700. I don't want to go into too many details, but this was a pretty bad decision. The software is just really bad. Almost no functionality and on top they tried to put some 'cloud-connection' stuff that is not only unnecessary, but counter productive. They tried to market it as a "Smart Router".  A bit later I bought myself a TP-Link  TL-WR1043ND  and have been using it ever since. However,  today I found the (now old) EA2700 in a moving box. This inspired me to check the interwebs for the current status of DD...
Read more

Setting up Arduino IDE 1.0 and 1.6 for ATtiny and Manchester library

Background I am currently working on a project where I want to deploy small battery powered ATtiny based modules to track a few things and to communicate back to an Arduino or Raspberry PI. While I was first trying to use the Virtual Wire library , I found out it couldn't handle the ATtiny85 that I was operating at 1 MHz. The reason for this is that it has a different timing from chips that run at regular speeds, like the Arduino itself. Luckily there is an alternative in form of the Manchester Encoding library for Arduino . It works not just with the typical Arduino chips but also with various ATtiny variants. The only problem was that my Arduino IDE setup I had in place did not work with this library. In the following I will outline what the issue was and how I got around fixing it. My original ATtiny85 setup When I started out coding for the ATtiny85 I used sparkfun's excellent tutorial on how to set-up the Arduino environment to compile and upload ATtiny progra...
Read more

Backing up a NAS to CrashPlan using a Raspberry Pi

Image
[Update on July 28th 2006] I have updated the post to reflect that CrashPlan 4.7.0 still works the same way as well as adding instructions for running the UI on MacOS/OSX Motivation I currently have a Synology DS212 (discontinued, but similar to more current  DS213 ), which works fine, but I wanted to have another backup of the data on it off-site, meaning not in my house. A few years ago I got myself a CrashPlan subscription and have since used to to back up my personal and my families data from multiple machines. Ideally I would like to run the CrashPlan software on my NAS, but the DS212 is not powerful enough to handle the Java-based CrashPlan client. Since I anyway already have a Raspberry Pi 2 Model B set up as a home server (I am running a custom home automation server and some other servers on it), I thought it would be great to add the CrashPlan client to it. Getting the CrashPlan headless client running on a Raspberry Pi is luckily possible, but there are a few ...
Read more